不同补贴对象下闭环供应链信息共享价值研究

在一个制造商和一个零售商组成的二级闭环供应链中,为研究政府补贴下供应链需求信息共享对决策的影响及共享价值,针对两种补贴对象,构建并求解无信息共享和信息共享博弈模型,并进行仿真验证.研究表明:1)两种补贴对象下,制造商均能从信息共享中获益,零售商仅在绿色成本和回收成本较低时才会从信息共享中获益;绿色成本和回收成本稍高时,设计基于谈判势力的信息补偿机制能有效促进零售商共享信息.2)产品绿色度和回收率随预测需求量的提高而提高,批发价和零售价仅在回收成本较低时,才会随预测需求量的提高而提高.3)在仅补贴一方情况下,当补贴对象为低补贴一方时,两个主体所获的信息共享价值大;若对两者的补贴均较低,两个主体均希望补贴对象为零售商;若对两者的补贴均较高,零售商不愿共享需求信息.     

基于SWT方法的钢绞线索微动疲劳特性分析

为得到钢绞线索丝间接触区的应力场分布并预测微动疲劳裂纹萌生位置和微动疲劳寿命，本文利用参数化方法建立了精细化的钢绞线拉索有限元模型，包括整索模型和不同层丝间接触区域的局部精细化子模型．分析了钢绞线索在两种交变荷载工况下的应力场变化情况，并基于多轴疲劳SWT(Smith-Watson-Topper)临界平面法进行了疲劳特性分析和疲劳寿命预测．主要结论如下：钢绞线索内接触区边缘处的微动幅值较大，中心处几乎没有相对滑动，微动疲劳的初始裂纹萌生点位于接触区域边缘；经不同区域子模型分析比较，在轴向循环荷载作用下，外层钢丝的接触区域比内层钢丝更易发生微动疲劳损伤；在横向位移循环荷载作用下，同层钢丝因位置角度不同而产生了较大的疲劳特性差异，且相比轴向循环拉伸，该工况下最不利单丝的微动疲劳寿命更低；与非接触区域相比，接触区的疲劳寿命大幅降低，微动现象对钢绞线索的抗疲劳性能有明显降低作用．     

Experimental and computational studies of naphthyridine derivatives as corrosion inhibitor for N80 steel in 15% hydrochloric acid

The inhibition effect of three naphthyridine derivatives namely 2-amino-4-(4-methoxyphenyl)-1,8-naphthyridine-3-carbonitrile (ANC-1), 2-amino-4-(4-methylphenyl)-1,8-naphthyridine-3-carbonitrile (ANC-2) and 2-amino-4-(3-nitrophenyl)-1,8-naphthyridine-3-carbonitrile (ANC-3) as corrosion inhibitors for N80 steel in 15% HCl by using gravimetric, electrochemical techniques (EIS and potentiodynamic polarization), SEM, EDX and quantum chemical calculation. The order of inhibition efficiency is ANC-1>ANC-2>ANC-3. Potentiodynamic polarization reveals that these inhibitors are mixed type with predominant cathodic control. Studied inhibitors obey the Langmuir adsorption isotherm. The quantum calculation is in good agreement with experimental results.     

波形钢板-UHPC组合桥面板结构截面优化

对实腹式波形顶板-UHPC(超高性能混凝土)组合桥面板进行了改进, 采用空腹式结构建立波形钢板-UHPC组合桥面板有限元模型, 研究UHPC层厚度、波形钢板厚度、波形长度、下缘板宽度和波形高度等截面参数变化对组合桥面板受力特性的影响, 并确定其合理取值范围. 在此基础上, 通过理想点法对参数组合进行优化, 得到合理的参数匹配. 研究结果表明 相较于实腹式组合桥面板, 优化后的组合桥面板自重减小35%, 钢板弯折处应力减小16%; 相较于正交异性钢桥面板, 桥面板用钢量减小7%, 顶板与U肋连接位置应力减小47%.     

Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: Analysis of required conditions

This paper investigates the essential conditions to improve the accuracy of a resistance spot welding computational study of advanced zinc coated steel sheets using rounded tip electrode. An experimental analysis is performed to highlight the required considerations for a suitable simulation. A sequential Electrical-Thermal-Metallurgical and Mechanical (ETMM) finite element analysis with appropriate precautions of the contact conditions enables to accurately simulate the nugget development during the welding. A critical smooth evolution of the contact radius is required. A fine meshing with an interfacial mesh size of at least 0.05 × 10⁻³ m combined with a coupling time step of 0.0025 s between the electrical-thermal-metallurgical and the mechanical analysis allows a regular incrementation of the contact radius, without burdening the time computing. Accurate values of the contact resistance depending on the interfacial pressure and temperature are essential for a good simulation of the nugget size. The ETMM calculation is successfully extended to the simulation of the welding of a typical two sheets assembly.     

Coating properties of a novel water stationary phase in capillary supercritical fluid chromatography

The coating properties of a novel water stationary phase used in capillary supercritical fluid chromatography were investigated. The findings confirm that increasing the length or internal diameter of the type 316 stainless‐steel column used provides a linear increase in the volume of stationary phase present. Under normal operating conditions, results indicate that about 4.9 ± 0.5 μL/m of water phase is deposited uniformly inside of a typical 250 μm internal diameter 316 stainless‐steel column, which translates to an area coverage of about 6.3 ± 0.5 nL/mm² regardless of dimension. Efforts to increase the stationary phase volume present showed that etching the stainless‐steel capillary wall using hydrofluoric acid was very effective for this. For instance, after five etching cycles, this volume doubled inside of both the type 304 and the type 316 stainless‐steel columns examined. This in turn doubled analyte retention, while maintaining good peak shape and column efficiency. Overall, 316 stainless‐steel columns were more resistant to etching than 304 stainless‐steel columns. Results indicate that this approach could be useful to employ as a means of controlling the volume of water stationary phase that can be established inside of the stainless‐steel columns used with this supercritical fluid chromatography technique.     

A self‐adaptive intelligence gray prediction model with the optimal fractional order accumulating operator and its application

The self‐adaptive intelligence gray predictive model (SAIGM) has an alterable‐flexible model structure, and it can build a dynamic structure to fit different external environments by adjusting the parameter values of SAIGM. However, the order number of the raw SAIGM model is not optimal, which is an integer. For this, a new SAIGM model with the fractional order accumulating operator (SAIGM_FO) was proposed in this paper. Specifically, the final restored expression of SAIGM_FO was deduced in detail, and the parameter estimation method of SAIGM_FO was studied. After that, the Particle Swarm Optimization algorithm was used to optimize the order number of SAIGM_FO, and some steps were provided. Finally, the SAIGM_FO model was applied to simulate China's electricity consumption from 2001 to 2008 and forecast it during 2009 to 2015, and the mean relative simulation and prediction percentage errors of the new model were only 0.860% and 2.661%, in comparison with the ones obtained from the raw SAIGM model, the GM(1, 1) model with the optimal fractional order accumulating operator and the GM(1, 1) model, which were (1.201%, 5.321%), (1.356%, 3.324%), and (2.013%, 23.944%), respectively. The findings showed both the simulation and the prediction performance of the proposed SAIGM_FO model were the best among the 4 models.     

基于改进的GM(1,1)-Markov链组合模型广东省单位GDP能耗预测

本文以灰色系统理论的GM(1,1)模型和随机过程理论的Markov链模型为基础构建了一个动态GM(1,1)-Markov链组合预测模型。该模型同时利用了GM(1,1)模型对序列趋势因素良好的拟合能力和Markov链模型对残差序列信息的提取能力。为进一步提高该模型的预测精度,用泰勒(Taylor)近似方法和新信息优先的思想对该模型进行了改进。最后,以1991-2014年广东省单位GDP能耗数据实证了该模型的预测效果。     

ITS示范工程对城市交通畅通性的贡献率研究

通过分析城市交通畅通性的影响因素及其与ITS(智能交通系统)的关系,挖掘ITS对城市交通畅通性的贡献率指标.搜集实证研究对象数据,采用灰色预测模型预测贡献率指标的数值,将ITS示范工程实施前后的数值进行对比,计算得到ITS示范工程对城市交通畅通性的贡献率.由贡献率结果判断ITS示范工程对城市交通畅通性的作用及ITS示范工程的实施效果如何,为未来ITS的发展提供相应的参考建议.     

钢渣与污泥协同资源化研究进展

钢渣和污泥作为传统大宗固体废弃物,始终面临处理成本高、回收利用率低等问题,但其内部含有大量可利用物质,具有较高的资源化利用价值,现已成为国内外的研究热点。为了提高钢渣与污泥绿色、高效、协同资源化利用,综述了近年来国内外钢渣在建筑、道路、水处理、农业等领域资源化利用的研究进展,立足固废无害化、减量化,从钢渣和污泥的资源化进行分析与总结,指出不同研究方法的特点和优劣,为固废资源化利用提供参考。并基于我国发展现状对钢渣与污泥资源化利用的未来发展方向进行了展望,以期为固废处理行业的良性发展提供一定的理论支撑。